Instruction Manual
UBG
–
Round bale grapple
–
1 hydralic cylinder
UBG2C
- Round bale grapple
–
2 hydralic cylinder
UBGS
- Round bale grapple SMART
USBG
–
Square bale grapple
Page
8
z
35
•
Never leave the vehicle when the engine is operating. Before you leave the driver's seat
you should lower the grapple on the ground, turn off the vehicle engine, take out the
ignition key, operate the hand parking brake.
•
Do not wear unbuttoned or loose-hanging work clothes while working, assembling,
disassembling or making adjustments. Keep them away from construction elements as
they may be caught by them.
•
The grapple should be disconnected from the vehicle not earlier than after turning the
vehicle engine off and taking out the ignition key.
•
After finishing work it is recommended to clean and wash the grapple in washing stand
fitted with sewage treatment or sediment trap to neutralize waste water.
•
The grapple should be stored on flat, paved surface under a roof, in places protected
against unauthorised persons and animals, and in a way eliminating the risk of accidental
injury.
•
In case of failure you should immediately disconnect the drive transmitted from the
vehicle.
•
The grapple operation by people under an influence of alcohol, drugs or other narcotics
is strictly forbidden.
•
All service procedures, which need a servicing person to stay near the grapple should be
done only with the grapple lowered on the ground and with the vehicle engine turned
off.
•
The grapple control may be done only from the vehicle cabin, to which the grapple is
connected and after taking the seat by the operator.
Failure to follow the above instructions could cause a risk for the operator and
unauthorized persons, as well as damage the grapple. The user bears
responsibility for damages resulting from the lack of observing the above rules.
The grapple is not intended to travel on public roads
–
transporting the grapple mounted on the tractor's suspension system during driving on
public roads is strictly forbidden.
