Rangevision SPECTRUM, Setup

Page: 15 / 28

Checking camera arrangement
Images​ ​ from​ ​ right​ ​ and​ ​ left​ ​ cameras​ ​ can​ ​ be​ ​ mismatched​ ​ or​ ​ flipped.​ ​ Use​ ​ the buttons
present​ ​ on​ ​ this​ ​ step​ ​ to​ ​ arrange​ ​ them​ ​ correctly.
If this setup wizard step is not needed after completion, it can be turned off by checking
the ​
Don't​ ​ show​ ​ this​ ​ step​ ​ anymore​ box. It can be brought back by checking the ​ Show​ ​ the
camera​ ​ arrangement​ ​ step​ ​ in​ ​ setup​ ​ wizard​ box located in ​ Settings​ ​
→
​ ​ Software​ ​
→
Cameras​ menu.
Finding a working distance
The​ ​ scanner​ ​ has​ ​ own​ ​ working​ ​ distance​ ​ (distance​ ​ to​ ​ the​ ​ object)​ ​ for​ ​ each​ ​ scanning​ ​ area.
When​ ​ you​ ​ configure​ ​ your​ ​ scanner,​ ​ this​ ​ distance​ ​ is​ ​ determined​ ​ by​ ​ calibration​ ​ plate.
To​
​ find​ ​ a​ ​ working​ ​ distance​ ​ place​ ​ the​ ​ calibration​ ​ plate​ ​ in​ ​ front​ ​ of​ ​ one​ ​ of​ ​ the​ ​ cameras.​ ​ By
moving​ ​ the​ ​ field​ ​ closer​ ​ to​ ​ or​ ​ further​ ​ away​ ​ from​ ​ the​ ​ camera,​ ​ align​ ​ the​ ​ far​ ​ markers​ ​ of
calibration​ ​ plate​ ​ with​ ​ blue​ ​ lines​ ​ on​ ​ the​ ​ camera​ ​ view,​ ​ as​ ​ shown​ ​ in​ ​ the​ ​ figure​ ​ below.​ ​ Blue
vertical​ ​ lines​ ​ in​ ​ the​ ​ camera​ ​ view​ ​ must​ ​ match​ ​ the​ ​ marks​ ​ on​ ​ the​ ​ calibration​ ​ plate.
15