RV1 Wheel Guardian™ Tire Changer
34
P/N 5900089 — Rev. A — March 2019
Secure the Wheel
Securing the Wheel ensures it stays in place while you demount or mount the Tire.
To secure a Wheel on the Turntable
:
1.
Select an appropriate Adapter or Cone.
You want the Adapter or Cone to go into the hole in the center of the Wheel without going all the
way through and touching the Turntable.
2.
If you are using a Cone, you also need to use the Turntable Spacer on the Turntable and under the
hole in the center of the Wheel; this prevents the Cone from touching the Turntable.
3.
Put the Quick-Nut into place.
Make sure to use the correct Cone (and Turntable Spacer) or Adapter with the Quick-Nut.
4.
Hold the Handle up and adjust the Threaded Shaft until the Threaded Shaft goes all the way down
into the top of the Turntable.
Important
: Make sure the Threaded Shaft goes down into the Turntable. If it does not, the
Quick-Nut will not correctly hold the Wheel in place.
5.
Hold the Quick-Release Levers to the side to quickly pass most of the threads in the Threaded
Shaft.
6.
When the Adapter or Cone is all the way down, release the Quick-Release Levers and turn the
Wings clockwise until the Quick-Nut is securely tightened.
7.
When the Wheel is secured by the Quick-Nut, flip up the Wings to get them out of the way.
When you need to remove the Quick-Nut later, reverse the process: flip down the Wings, turn the
Wings counter-clockwise until the Quick-Nut is untightened, then hold the Quick Release Levers to
the side and pull up the Quick-Nut.
Summary of Contents for Wheel Guardian RV1
Page 51: ...RV1 Wheel Guardian Tire Changer 51 P N 5900089 Rev A March 2019 Labels ...
Page 52: ...RV1 Wheel Guardian Tire Changer 52 P N 5900089 Rev A March 2019 ...
Page 53: ...RV1 Wheel Guardian Tire Changer 53 P N 5900089 Rev A March 2019 ...
Page 79: ...RV1 Wheel Guardian Tire Changer 79 P N 5900089 Rev A March 2019 Maintenance Log ...
