Ranger RS-500-D-601, Installation And Operation Manual

Page: 20 / 40

RS Series Spray-Wash Cabinets
20
P/N 5900245 — Rev. B7 — November 2019
More About Foaming
If the information on the previous page about dealing with excessive foaming did not help with your
foaming problem, here are some less common issues to consider:
•
Oil skimming . Your oil skimming could be removing defoamant. You can try adjusting the
skimmer to operate when the solution cools and oils have floated to the surface and the
defoamants has returned to the solution. However, if you are cleaning synthetic oils and greases,
you should run your oil skiller continuously; the buildup of synthetic oils will cause extra foam.
• Contaminants with animal fat . Greases and other contaminants that contain animal fat can
cause extra foaming with alkaline chemicals.
If you are using a detergent other than Aluma-Klean, here are some other factors to consider:
•
Types of contaminants . The type of contaminants on the parts you are washing can interact
with the detergent, causing extra foaming. Check to see if your detergent is compatible with the
operating temperature of the Parts Washer, the kinds of parts you are washing, and the types of
metals in the parts you are washing. If the detergent is not compatible, change to a more
compatible type.
• Detergent concentration . Make sure the concentration of the detergent you are using is
compatible with the Parts Washer. If the concentration is too little or too much, it could be the
source of the foaming.
• Detergent type . Make sure the detergent is formulated for high velocity and high impact
washing of parts. Detergents not specifically developed for washing parts under these conditions
can foam much more than normal when used in a Parts Washer.
Additional Aluma-Klean Safety Information
Your Parts Washer comes with Aluma-Klean detergent.
⚠
WARNING: Use care when handling Aluma-Klean detergent. It is harmful if swallowed, can
cause severe skin burns and eye damage, and can cause respiratory irritation.
The Material Data Safety Sheet for Aluma-Klean Detergent , which contains additional
safety information about it, is available on the Ranger website.
First aid measures include:
•
Eyes . Check for and remove contact lenses. Immediately flush eyes with water for at least 15
minutes, occasionally lifting the upper and lower eyelids.
Get medical attention
immediately
.
•
Skin
. In case of skin contact, immediately flush the skin with water for at least 15 minutes while
removing contaminated clothing. Thoroughly wash clothing before reuse. Get medical attention if
irritation develops.
• Inhalation . Move exposed person to fresh air. If irritation persists, get medical attention.
• Ingestion . Wash out mouth with water. Do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious person. If affected person is
conscious, give plenty of water to drink.
Get medical attention immediately
.