RP-50FC High-Speed Oil Filter Crusher
3
P/N 5900392 — March 2017 — Rev. B
Table of Contents
Introduction
3
Maintenance
21
Shipping Information
3
Troubleshooting
22
Safety Considerations
4
Warranty
22
Specifications
5
Parts Diagrams
23
Components
6
Wiring Diagram
26
Setup
7
Maintenance Log
27
Operation
20
Introduction
This manual describes the RP-50FC high-speed oil filter crusher from Ranger Products, which applies
up to 25 tons of electric hydraulic pressing power to flatten just about any used oil filter to
approximately 20 percent of its size while removing up to 95 percent of the residual oil.
More information about the full line of Ranger Products is available at
www.rangerproducts.com
.
This manual is mandatory reading for all users of the RP-50FC, including anyone who sets it up,
operates it, maintains it, or repairs it.
⚠
DANGER
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your RP-50FC is available directly from your distributor or by calling
the
Ranger Products Technical Support Hotline at +1.805.933.9970
. You may also
contact the Hotline for consultation on parts replacement (please have the serial number and model
number of your unit available).
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
To protect yourself, do not sign the bill of lading until
after
you have inspected the
Summary of Contents for RP-50FC
