RD-20SE Rolling Air Evacuated Oil Drain
4
P/N 5900327 — Rev. A — February 2022
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this entire manual carefully before using your new product.
Do not install or
operate the product until you are familiar with all operating instructions and warnings. Do not allow
anyone else to operate the product until they are familiar with all operating instructions and warnings.
⚠
WARNING
California Proposition 65
. This product can expose you to chemicals including
styrene and vinyl chloride which are on the list of over 900 chemicals identified by
the State of California to cause cancer, birth defects or reproductive harm. Always
use this product in accordance with BendPak’s instructions. For more information,
visit
Safety Information
Please note the following:
•
The product is a Rolling Air Evacuation Oil Drain.
Use it only for its intended purpose.
•
This safety information and the warnings throughout this manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common
sense and caution are required at all times when using this equipment.
•
Read and understand all warnings, safety precautions and instructions prior to use.
•
Do not drain caustic or volatile fluids or fuels into the RD-20SE!
These Fluids could
cause damage to the equipment and personal injury.
•
Do
not
weld to the RD-20SE tank or its supporting structures.
•
The product should only be operated by authorized personnel. Keep children and untrained
personnel away from the product.
•
When using the product, wear appropriate personal safety equipment, work clothes and ANSI-
approved safety goggles. Do not wear loose clothing or jewelry. Keep hair and clothing away from
moving parts. Always comply with the personal protective equipment required by the fluid
manufacturer.
•
Automotive Fluids may be hot and cause severe burns or injury to skin and eyes! Temperatures
can exceed 220
°
F / 104
°
C. Allow engine and oil to cool before opening the system and removing
oil.
•
Some oil systems may be under pressure; opening these systems while hot can cause oil to be
sprayed forcefully and injury may result.
•
Compressed air can be dangerous.
Never
point compressed air nozzles or fittings at yourself or
anyone near you.
•
Never
exceed the rated input air pressure of 120 psi / 8 bar
•
Never
pressurize the Rolling Drain Tank with the 2
"
Ball Valve open!
•
Used oils are flammable, keep away from open flames or other ignition sources.
•
Always comply with local, state and national regulations for the disposal of Waste Fluids.
