RCI-2985
DX
RCI-2995
DX
CHAPTER 3
INTRODUCTION
- 12 -
(3)
Set the
VOL.
to a comfortable listening level.
(4)
Set the
MODE
switch to the desired mode.
(5)
Listen to the background noise from the speaker. Turn the
SQUELCH
knob slowly clockwise until
the noise just disappears. The
SQUELCH
is now properly adjusted. The receiver will remain quiet
until a signal is actually received. Do not advance the control too far or some of weaker signals will
not be heard.
(6)
Set the
CHANNEL
selector switch to the desired channel.
(7)
Set the
RF GAIN
control fully clockwise for maximum RF gain.
(8)
Adjust the
CLARIFIER
control to clarify the SSB signals or to optimize AM/FM signals.
3.3.11 PROCEDURE TO TRANSMIT
(1)
Select the desired channel of transmission
(2)
Set the
MIC GAIN
control fully clockwise.
(3)
If the channel is clear, depress the push-to-talk switch on the microphone and speak in a normal
voice.
Summary of Contents for RCI-2985DX
