R745 Swing-Arm Tire Changer
3
P/N 5900171 — Rev. C — Dec. 2019
Table of Contents
Introduction
This manual describes the following Tire Changer:
•
R745
. Swing Arm, 110 or 220 VAC power, for demounting, mounting, and inflating automobile
and light truck single-piece Tires.
More information about BendPak Ranger products is available at
This manual is mandatory reading for all users
of the R745, including anyone who sets up,
operates, maintains, or repairs it.
You can always find the latest version of the
manual for your product on the BendPak
⚠
DANGER
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Tire Changer is available from your distributor or by calling
BendPak Ranger at (805) 933-9970
. You may also call regarding parts replacement (please
have the serial number and model number of your unit available).
Summary of Contents for R745
Page 52: ...R745 Swing Arm Tire Changer 52 P N 5900171 Rev C Dec 2019 Labels ...
Page 53: ...R745 Swing Arm Tire Changer 53 P N 5900171 Rev C Dec 2019 ...
Page 54: ...R745 Swing Arm Tire Changer 54 P N 5900171 Rev C Dec 2019 ...
Page 67: ...R745 Swing Arm Tire Changer 67 P N 5900171 Rev C Dec 2019 Maintenance Log ...