background image

 

R745 Swing-Arm Tire Changer 

4

 

P/N 5900171 — Rev. C — Dec. 2019 

Shipping Information 

Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect 
the shipment 

before

 you sign to acknowledge that you received it. 

When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good 
condition. 

Do not sign the bill of lading until 

after

 you have inspected the shipment.

 If any of the 

items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier 

makes a notation on the bill of lading that lists the missing or damaged goods. 

If you discover missing or damaged goods 

after

 you receive the shipment and have signed the bill of 

lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not 
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a 

specific date) and that the carrier has failed to comply with your request. 
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this 

happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of 
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you 

process your claim does not make us responsible for collection of claims or replacement of lost or 

damaged materials. 

Safety Considerations 

Read this manual carefully before using your new product.

 Do not set up or operate 

the product until you are familiar with all operating instructions and warnings. Do not allow anyone else 
to operate the product until they are also familiar with all operating instructions and warnings. 

 

WARNING

 

There are many moving parts on a Tire Changer; keep clear of these moving parts 
and the Tire being changed. In particular, when inflating a Tire, never lean over the 

Tire; if it were to explode (which does happen), the force could injure or kill the 
Operator or bystanders. During inflation, the Operator should be as far away from 

the Tire as possible and all bystanders must be at least 30 feet away. 

Safety Information 

Please note the following: 

 

The product is a Tire Changer. 

Use it only for its intended purpose.

 

 

The product 

must

 only be operated by authorized, trained, properly supervised personnel. Keep 

children and untrained personnel at least 30 feet away from the product when it is in use. 

 

Always follow all applicable local, state, and federal codes, rules, and regulations, including (but not 
limited to) OSHA standard 1910.177 (Servicing multi-piece and single piece rim wheels). 

 

You 

must

 wear OSHA-approved (publication 3151) Personal Protective Equipment at all times 

when installing, using, maintaining, or repairing the Tire Changer. Leather gloves, steel-toed work 
boots, eye protection, back belts, and hearing protection 

are mandatory

 

Do not use the product while tired or under the influence of drugs, alcohol, or medication. 

 

Do not use the product in the presence of cigarette smoke, dust, or flammable liquids or gases. 
Use the product indoors in a well-ventilated area. 

 

Do not make any modifications to the product; this voids the warranty and increases the chances 
of injury or property damage. 

Do not modify any safety-related features in any way

Summary of Contents for R745





































































Reviews: