Ranger R745 Installation And Operation Manual Download

Page: 30 / 68

R745 Swing-Arm Tire Changer

P/N 5900171 — Rev. C — Dec. 2019

Bead Breaker

Use the Bead Breaker to break the Beads (on both sides) of the Tires you are demounting.

⚠

WARNING

Do not break the Beads of a Tire until you are certain the Tire is fully
deflated

. Breaking the Bead of a Tire with air still in it could injure you or others

nearby. The best way to be sure the Tire is fully deflated is to remove the Valve

Core and wait for all of the air to come out.

Top view. Not necessarily to scale. Not all components shown.

⚠

WARNING

There is a risk of crushing with the Bead Breaker

. Do not hold onto the

Blade Handle when the Bead Breaker is moving. After positioning the Bead Breaker
Blade using the Handle, move away from the Bead Breaker, and make sure the
area is completely clear,

before

pressing down on the Bead Breaker Foot Pedal.

The main parts of the Bead Breaker are:
•

Bead Breaker Mechanism

. Moves in and out under the control of the Bead Breaker Foot

Pedal. Moves with great force; make sure you are completely clear of the Blade and the Bead
Breaker Mechanism

before

pressing down on the Bead Breaker Foot Pedal.

•

Blade

. The part of the Bead Breaker that contacts the Tire and actually breaks the Bead. Make

sure to keep the Blade slightly off the Wheel Rim. You could damage the Rim.

•

Blade Handle

. Controls the Blade, moving it side to side and in and out.

•

Pad

. The side of the Tire whose Bead is

not

being broken goes against the Pad.

Bead Lifting Tool

Use the Bead Lifting Tool to pull the Tire’s Bead up and over the Mount/Demount Tool to help

demount the Tire.
You can also use the Bead Lifting Tool to push down the Tire’s Bead — to the left of the

Mount/Demount Head — during the mounting of a Tire.
The Bead Lifting Tool has an angled and a hooked end. You can use either end.

Summary of Contents for R745




































































Search results

Summary of Contents for R745

Reviews:

Related manuals for R745

Brands by name

Popular brands

Ranger R745, Installation And Operation Manual

Search results

Summary of Contents for R745

Reviews:

Related manuals for R745

Brands by name

Popular brands