R745 Swing-Arm Tire Changer
21
P/N 5900171 — Rev. C — Dec. 2019
Final Checklist
Make sure the following items have been done
before
putting the Tire Changer into normal operation:
•
Review the Installation Checklist
. Make sure that all of the steps on the
•
Check for air pressure
. The Tire Changer requires pneumatic energy to perform certain
functions.
To see if the Tire Changer has air pressure, take the Air Chuck and lightly press and hold down the
Trigger of the Inflation Gun. If air comes out, the Air Source is connected and working.
•
Test the power source
. Other Tire Changer functions require electric power. Step on and hold
down the Turntable Foot Pedal to check for electric power. If the Turntable turns, you have power.
•
Check the Anchor Bolts
. If the Tire Changer is bolted down, make sure the Anchor Bolts are
in position and tightened down.
•
Make sure there is Tire lubricant available
. Your shop probably has a brand of Lube that
it prefers. Make sure some is in the Lube Bucket on the Tire Changer. Always use Lube; it makes
changing Tires easier and helps prevent damage to the Tire and the Wheel.
•
Change some non-customer Tires
. To get used to the Tire Changer, BendPak Ranger
recommends having all potential Operators change
multiple
non-customer
Tires before working
on customer Tires.
•
Leave the Manual with the owner/operator
. Questions are going to come up that only the
Manual can answer. Plus, new Operators will need to study it before starting to change Tires. The
Manual needs to be kept near the Tire Changer at all times.
Summary of Contents for R745
Page 52: ...R745 Swing Arm Tire Changer 52 P N 5900171 Rev C Dec 2019 Labels ...
Page 53: ...R745 Swing Arm Tire Changer 53 P N 5900171 Rev C Dec 2019 ...
Page 54: ...R745 Swing Arm Tire Changer 54 P N 5900171 Rev C Dec 2019 ...
Page 67: ...R745 Swing Arm Tire Changer 67 P N 5900171 Rev C Dec 2019 Maintenance Log ...
