13
5.
Wait indicator light (yellow L.E.D.) lights when unit is self calibrating
discriminating an object or goes into noise or metal overload fault condition.
8.0.
ADJUSTING OPERATING PARAMETERS
All adjustments to the operating parameters are entered via the Keypad and viewed
on the L.C.D. Display panel. A pass-code is needed to access the program prior to
making parameter changes.
All operating parameters in menu have a preset value (nominal value). The nominal is
a pre-set factory adjustment and should only be considered as a starting point.
9.0.
USING THE KEYPAD AND L.C.D DISPLAY
L.C.D. Display shows model and version number.
Press keys
123456
an
Ent.
After entering pass-code, select (M↑) or (M↓) to
scroll thru menu
.
M to select
appears on the L.C.D.
menu.
Push (M↓) select
PGL Threat Aviation current 1 new * appears on
the L.C.D. Any of the 20 programs can be selected.
(See: section on program settings)
Push (M↓) select
Baseline sensitivity current 50% new * appears on
the L.C.D. Select new sensitivity.
Push (M↓) select
Alarm tone 1-3 current 2 new * appears on the
L.C.D. select new tone.
Push (M↓) select
Alarm Volume 0-7 current 4 new * appears on the
L.C.D. select new volume.
Push (M↓) select
Alarm hold 1-99 current 1 new * appears on the
L.C.D. select new, this selects the time the alarm
zone light stays on.
10.0.
Main Menu Selections
Program
– Sets the desired program. Programs 1 -12 factory set values, 21 – 24 users defined
.
Baseline Sensitivity
– Sets 6 horizontal zones to same baseline setting.
Alarm Tone
– Sets the frequency of the audio alarm.
Alarm Volume
– Sets the volume level of the alarm tone.
Alarm Hold Time
– Sets the time duration of the LED indication of the alarm.
Summary of Contents for INTELLISCAN SIX ZONE
Page 5: ...5 ...
