Ranger DST-642D, Installation And Operation Manual

Page: 24 / 80

DST-64T / DST642D Wheel Balancers
24
P/N 5900192 — Rev. F — March 2021
Operation
This section describes how to use your Wheel Balancer.
⚠
DANGER Being in close proximity to a Balancer is a serious endeavor with potentially life-
threatening risks. Only trained, authorized, supervised personnel may be within 30
feet of the Balancer while it is in use.
Do not assume you are going to be
safe using the Balancer this time just because nothing happened
last time
.
Safety Precautions
Keep the following in mind while you use your Balancer:
•
Make sure all Operators receive specific training in Wheel balancing
before
they are allowed to
use the Balancer, that their training is verified through a testing program, and that all training is
documented. All others, including children and untrained personnel, must be kept at least 30 feet
away from the Balancer while it is in use.
• Make sure
new
Operators are trained and supervised in the use of the Balancer.
• Do not use the Balancer while tired or under the influence of drugs, alcohol, or medication.
• Make a visual inspection of the unit
before each use
. Do not operate your Balancer if you find
any issues. Instead, take the unit out of service, then contact your dealer, visit
www.bendpak.com/support/ , or call (805) 933-9970 .
• Keep the work area clean and well lit. Dirty, cluttered, and dark work areas increase the chances of
an accident happening.
• Do not remove the Tray unless instructed to do so by Ranger Support. There are no user
serviceable parts underneath.
• You
must
wear OSHA-approved (Publication 3151) Personal Protective Equipment at all times
when installing, using, maintaining, or repairing the Balancer. Leather gloves, steel-toed work
boots, ANSI-approved eye protection, back belts, and hearing protection
are mandatory .
⚠
WARNING Always wear ANSI-approved eye protection. Although rare, an accident could
cause significant injuries to your eyes.
• Do not use the unit in a wet environment or expose it to rain or excess moisture.
• If an extension cord is necessary, you must use a cord with a current rating equal to or more than
that of the equipment. Cords rated for less current than the equipment may overheat. Arrange the
cord so that it will
not be tripped over or pulled out.
• Do not use the Balancer in the vicinity of open containers of flammable liquids.
• Clean the Balancer according to the instructions in Maintenance .
•
Study
the entire Installation and Operation Manual before using the unit.