Ranger 5058, Installation Manual

Page: 7 / 8

For technical support, contact us at 1-800-565-5321 5058 Installation Guide | REV. A1 | Page 7
FORWARD REVERSE
• Put the Plusnut on the Plusnut gun.
• Secure the Plusnut to the hole by turning the gun forward until the Plusnut locks.
• Remove the gun by turning in reverse.
6490 HARDWARE USED
Flat washer 1/4"
Flat washer 1/4" 3/4" OD
TOOLS
q Cordless Impact
q
7/16" Socket
q 9/16" Wrench
STEP 1:
Assemble the 6490 Plusnut tool with the hardware needed,
Plusnut and the 9/16" wrench as shown.
FORWARD REVERSE
STEP 2:
Secure the Plusnut to the hole by turning
the bolt forward using an impact with
a 7/16" socket until the Plusnut locks.
Then remove the bolt by turning the
impact in reverse.
• The hardware used for the 6490 plusnut tool is not included in the fastener bag.
• The 6490 plusnut tool can be ordered separately upon demand at no charge.
2.3 USING THE PLUSNUT TOOL
2.3.1 Using a Plusnut Gun.
2.3.2 Using a Plusnut Tool.