background image

INSTALLATION AND OPERATION MANUAL

1100 POUND CAPACITY
MOTORCYCLE / ATV LIFT
MODEL:
RML-1100

Keep this operation manual near the 

machine at all times. Make sure that 

ALL USERS  read this manual .

SHIPPING DAMAGE CLAIMS

When this equipment is shipped, title passes to the purchaser 
upon receipt from the carrier. Consequently, claims for the 
material damaged in shipment must be made by the purchaser 
against the transportation company at the time shipment is 
received.

BE SAFE

Your new lift was designed and built with safety in mind. 
However, your overall safety can be increased by proper 
training and thoughtful operation on the part of the 
operator. DO NOT operate or repair this equipment 
without     

reading this manual and the important safety 

instructions shown inside.

1645 Lemonwood Dr.

Santa Paula, CA. 93060, USA

Tel: 1-805-933-9970

Fax: 1-805-933-9160

www.bendpak.com

www.rangerproducts.com

PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO 
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT 
YOU FULLY UNDERSTAND AND  COMPREHEND THE FULL CONTENTS OF 
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO 
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. 

REV A 04-16-10

Summary of Contents for RML-1100









Reviews: