8
FEATURES / SPECIFICATIONS
MODEL R23LT / R23AT
Type of Drive System
Air / Electric
Motor
Dual Voltage 110/220V 50/60HZ 1 Ph.
Air Requirement
140-165 PSI (10-11 BAR)
Wheel Clamping Method
4 Rim-Guard Clamps - Internal / External
Table Clamping System
Dual Pneumatic Cylinders
Bead Breaking System
Pneumatic Blade / Dual Settings
Turntable Speed -360-Degree Rotation
6.9 Seconds
Tool Holder
Pneumatic Lock
Adjustable Turntable Clamps
Standard
Inflation System
Standard
Inflation Pressure Regulator/Limiter
Standard
Water Filter
Standard
Oiler / Lubricator
Standard
Air Regulators
Standard
Bead Lifting Tool
Standard
Large Soap / Lubricator Bucket
Standard
Brush
Standard
Tower Design
Tilt Back
Powerful "Turbo -Blast" Bead Seating System
Standard
Tire Inflation
Standard
Tool Tray / Bin Storage
Standard
Internal Wheel clamping Capacity *
11" – 24" (279 mm – 610 mm)
External Wheel clamping Capacity *
10" – 23" (254 mm – 584 mm)
Turntable Tire Width Capacity (Mounting)
4.5" – 17.5" (114 mm – 444 mm)
Bead Breaker Tire Width Capacity (Demounting)
1" – 16" (25 mm – 406 mm)
Maximum Tire Diameter
44" (1118 mm)
Shipping Weight
R23LT: 712 lbs. (323 Kg) / R23AT: 860 lbs. 391(Kg)
Specifications are subject to change without notice.
* NOTE: Internal and External Wheel clamping dimensions do not translate directly to rim or tire sizes as Wheel
clamping points may vary by manufacturer.
SECTION 5
FEATURES / SPECIFICATIONS: MODEL R23LT / R23AT
Tools required.
1. Pallet jack or forklift for moving crate.
2. Shop crane.
3 Utility knife.
4. Crow bar or pry bar.
5. Tin Snips or Sheet Metal Snips
6. Hammer.
7. Open end metric wrenches and/or socket set.
8. Phillips and Slot head screw drivers.
9. Metric Allen Key set.
Parts required but not supplied.
1. Teflon tape
2. Air fitting to match shop Air Supply line.
3. Tool Oil.
4. Anchor Bolts and Shims (if Anchoring)
