For technical support, contact us at 1-800-565-5321
7209 Installation Guide
| REV. C1 | Page
12
PHASE 2
– INSTALLATION
2.3 WORKBENCH W/O MOUNTING TRACK INSTALLATION
NOTE:
Always start install from front of the vehicle to rear.
2.3.1
Lift the assembled workbench to the vehicle, then mark the holes on the “L” brackets
and end panels to the vehicle.
Align the left and right “L” brackets
to the horizontal rim, then mark the 2
holes of the left and right “L” brackets
on the vehicle horizontal rim.
MARK
TOOLS
q
Marker
MARK
TOOLS
q
Marker
Mark the 4 holes of each end panel on
the vehicle floor.