For technical support, contact us at 1-800-565-5321
3320-PC Installation Guide | REV. J2 | Page 2
QUICK START GUIDE
REQUIRED ITEMS
2
PERSONS
q
Cordless Impact
q
Cordless Drill
q
Knife
q
Philips Screw Driver
q
Plusnut Tool
q
Ratchet
q
1/2" Socket
q
7/16" Socket
q
10mm Socket
q
13mm Socket
q
T30 Torque Bit
q
T40 Torque Bit
q
9/16" Wrench
q
1" Holesaw
q
1.1 Setup....................................................................................................................................................
q
1.1.1 Unpack components; compare with the bill of materials................................................................
q
1.1.2 Verify all parts are present...............................................................................................................
q
1.1.3 Identify the assembly and installation fastener bags......................................................................
q
1.2 Partition Assembly................................................................................................................................
q
1.2.1 Attach the lower panel and mounting track to the upper panel......................................................
q
1.2.2 Attach the sides of the upper panel and lower panel together on both sides................................
3
3
3
4
5
5
6
Phase 1 - Assembly
q
2.1 Tips on how to attach a plusnut..........................................................................................................
q
2.1.1 Attach plusnut using plusnut gun...................................................................................................
q
2.1.2 Attach plusnut using Ranger plusnut tool......................................................................................
q
2.2 Vehicle preparation..............................................................................................................................
q
2.2.1 Removing handle............................................................................................................................
q
2.2.2 Removing overhead plastic............................................................................................................
q
2.2.3 Driver and passenger sides preparation.........................................................................................
q
2.2.4 Ceiling and floor preparation..........................................................................................................
q
2.3 Contoured partition installation...........................................................................................................
q
2.3.1 Attach J - shapes and the floor brackets in the van.......................................................................
q
2.3.2 Lift the assembled partition in the van, then bolt both sides of the partition in the van.................
q
2.3.3 Attach the upper and lower panels to the J - shapes and floor brackets.......................................
q
2.3.4 Apply the warning label on the upper panel...................................................................................
7
7
7
8
8
9
10
11
12
12
13
14
15
Phase 2 - Installation
