SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
34
7. To Remove A Thermostat
Remove control panel (see 2) and cooktop (see 3).
Open the appropriate oven door and remove the oven
shelves.
RH oven
Remove oven roof. Remove the two fixings that secure
the thermostat phial cover. Unclip the thermostat phial
from the clips in the oven back panel & remove from
the top rear of the oven.
LH oven
Remove the two screws holding the thermostat phial to
the oven fan cover at the rear of the oven. Pull the unit
forward to access the rear of the cooker. Remove both
rear cover boxes by removing the fixing screws and
lifting clear. Feed the thermostat capillary clear of the
oven. Disconnect the wires from the thermostat and
undo the two fixings that secure the control to the
mounting plate. Fit the replacement and re-assemble in
reverse order. Ensure that the phial is clipped to the
oven rear, positioned centrally between the clips.
Check that the thermostat functions correctly.
8. To Change Grill Controller
Remove the control panel (see 2) and cooktop (see 3).
Disconnect wiring from controller. Remove 2 screws
holding switch/controller to mounting panel. Fit new
controller and reassemble in reverse order. Check for
correct operation.
BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF GAS SUPPLY.
9. To Change a Hotplate Tap
Remove the cooktop top, see 3. Undo the nut at rear of
the valve and remove the screw(s) securing valve to
gas rail. Remove old valve, discard old gasket/seal. Fit
new gasket/seal to new valve.
Reassemble in reverse order. Check valve is adjusted
for correct gas. Check cooker is gas sound.
10. To Change a Hotpate burner jet
Remove burner cap and head. Remove old jet. Fit new
orifice. Note the Wok burner has 2 orifices.
Reassemble in reverse order. Check appliance is gas
sound.
11. To Change Hotplate Burner Electrode
Lift off cooktop grates, remove burner cap. Remove the
screw holding the electrode. Pull electrode vertically up
sufficiently to grip the lead between thumb and
forefinger. Pull off the electrode, but keep hold of the
lead. Fit new electrode to the lead. Fix electrode in
burner with screw. Replace burner cap. Check the
burner ignition. Replace grates.
12. To Remove or Change a Hotplate Burner.
Remove the cooktop tray (see 3).
Centre Hotplate burners
Remove the control panel (see 2). The burners are
mounted in 2’s on cross supports. Disconnect the
burner feed pipes at the burners. Remove the screw at
the front holding the cross support. Slide the support to
the right to release in from the rear location.
Lift the cross support and burners clear. The burners
are fixed to the cross supports with screws underneath
Remove the appropriate burner and fit the new one.
Reassemble in reverse order. Check burner operation
is satisfactory.
Wok burners
Disconnect the burner feed pipes at the burner. Fit the
new one and reassemble in reverse order. Check
burner operation is satisfactory.
13. To Remove Grill Outer Door Panel
Open left hand oven door and remove 2 screws from
bottom edge of grill door. Open grill door, support grill
door outer panel and remove two screws from top inner
face of grill door.
Reassemble in reverse order.
14. To Remove an Oven Door
Open oven door and remove Handyrack (where fitted)
by springing one side out of the bracket on the door
and sliding the other side free. Support the door and
remove the two screws securing the upper hinge and
packing to the cooker front. Remove the door from the
lower hinge by lifting slightly and moving outwards.
Reassemble in reverse order.
