background image

 

 

 

 

 

EN 

9

 

MAINTENANCE

 

Grease filters 

CLEANING METAL SELF- SUPPORTING GREASE FILTERS 

•  The filters must be cleaned every 2 months of operation, or 

more frequently for particularly heavy usage, and can be 
washed in a dishwasher. 

•  Remove the filters one at a time by pushing them towards the 

back of the group and pulling down at the same time.  

•  Wash the filters, taking care not to bend them. Allow them to 

dry before refitting. 

•  When refitting the filters, make sure that the handle is visible 

on the outside.

 

 

Activated charcoal filter (Recirculation version) 

REPLACING THE ACTIVATED CHARCOAL FILTER 

•  The filter is not washable and cannot be regenerated, and must 

be replaced approximately every 4 months of operation, or 
more frequently for particularly heavy usage. 

•  Remove the metal grease filters. 
•  Remove the saturated activated carbon filter by releasing the 

fixing hooks. 

•  Fit the new filter by hooking it into its seating. 
•  Refit the metal grease filters.

 

 

Lighting 

LIGHT REPLACEMENT 

20 W halogen light. 

•  Remove the snap-on lamp cover by levering it from under the 

metal ring, supporting it with one hand. 

•  Remove the halogen lamp from the lamp holder by pulling 

gently. 

•  Replace the lamp with a new one of the same type, making 

sure that you insert the two pins properly into the housings on 
the lamp holder. 

•  Replace the snap-on lamp cover.

 

 

Summary of Contents for RMHDT90SS













Reviews: