background image

These warnings are provided in the interests of safety. Ensure that you understand
them all before installing or using this appliance. Your safety is of paramount importance.
If you are unsure about the meaning of any of these warnings contact the Helpline.

INSTALLATION

Any installation work must be
undertaken by a qualified electrician or
a competent person.

This hood must be installed in
accordance with the installation
instructions and all measurements
must be adhered to.

If the cooker hood is installed for use
above a gas appliance then the
provision for ventilation must be in
accordance with the latest edition of
the Gas Safety Codes of Practice and
the Gas Safety (Installation & Use)
Regulations, the Building Regulations
issued by the Department of the
Environment, the Building Standards
(Scotland) (Consolidated) Regulations
issued by the Scottish Development
Department.

The fan motor of this cooker hood
incorporates a cut-out device which will
operate if the cooker hood is installed
below the minimum height
recommended under the section
‘Clearance Height’, or if the motor
becomes overheated. If the cut-out
device is activated, switch off the fan
motor and allow the cooker hood to
cool. The cut-out device will reset itself
when the fan motor has cooled
significantly.

It is dangerous to alter the
specifications or modify this product in
any way.

When installed between adjoining wall
cabinets the wall cabinets must not
overhang the hob.

IMPORTANT SAFETY INFORMATION

If the room where the cooker hood is to
be used contains a fuel burning appliance
such as a central heating boiler then its
flue must be of the room sealed or
balanced flue type.

If other types of flue or appliances are
fitted ensure that there is an adequate
supply of air to the room.

The ducting system for this appliance
must not be connected to any existing
ventilation system that is being used for
any other purpose.

Do not install above a cooker with a high-
level grill.

CHILD SAFETY

This appliance is designed to be operated
by adults. Children should not be allowed
to tamper with the appliance.

DURING USE

This product is for domestic use only.

Never leave frying pans unattended during
use as overheated fats and oils might
catch fire.

Never do flambé cooking under this
cooker hood.

Do not leave naked flames under the
cooker hood.

2

Summary of Contents for RMHDT110SS

















Reviews: