11
Troubleshooting
Replacing The Light Bulb
Concrete operations:
Take off the plug from power supply.
Take off the lampshade
Take down halogen lamp Warning: Hot lamp!
Fill new halogen lamp (230V-25W).
Operate according to the instruction.
Install lampshade well.
Connect the power.
The lamp is not suggested for consumer to replace. The
replacing should be done by a professional mechanic.
Installing the appliance
Before The Installation
Open the oven door and take out all the accessories and
remove the packing material.
Make sure that the oven is not damaged by any way. Check
that the oven door closes correctly and the inside of the door
and front oven panel are not damaged.
Do not use the oven if the power cable or the plug is
damaged, if the oven does not function correctly or if it has
been damaged or dropped. Put the oven on a flat and stable
surface. The oven should not be installed close to any heat
source, radios or televisions.
During installation, make sure that the power cable does
not come into contact with any moisture or objects with
sharp edges and the back of the oven. High temperature can
damage the cable. Warning: after the oven is installed you
should make sure you can access the plug.
