6
USING YOUR Sentry System
™
CONTROL MODEL RDZ60
Start Your Appliance
Please observe the following options when starting your ap-
pliance during initial plug-in.
1) If Sentry System™ LED is flashing amber (see Figure 4)
the appliance is on. Simply press and release “ON/
OFF” button to stop the flashing LED.
2) If the interior light is working but Sentry System™ display
is blank push and hold the “ON/OFF” button for five (5)
seconds to start your appliance.
Once loaded with wine bottles, allow at least 24 hours for
the unit to stabilize before making any adjustments to the
initial temperature setting and minimize the door openings
during this time period.
Set Your Temperature Mode
This product can display either Fahrenheit or Celsius. To do
so, press the “
°
F/C” key on the display panel.
Control Range
The unit is equipped with two individual refrigeration com-
partments each one independent of the other. The available
temperature range of each compartment is from 4 to 18 °C
(40 to 65°F). The control range allows flexibility of tempera-
ture preferences and provides the ideal wine storing and/or
serving temperatures. Optimum efficiencies regarding per-
formance and energy consumption are achieved when the
lower compartment is chosen as the coldest compartment of
the two compartments.
Viewing and Changing Current Temperature Settings
The temperature set point is initially set in the factory at
13
°
C. To view the set point push the “SET” button once and
the word “SET” and the current set-point will be displayed
in the upper compartment. Push the “SET” key a second
time and the word “SET” and the current set-point will be
displayed in the lower compartment. While the “SET” icon
is displayed for a given chamber, push the “WARMER” or
“COLDER” key for your desired temperature. Push the
“SET” key to exit set-point mode and activate your new
temperature settings, or after 10 seconds the new settings
will automatically be activated. As with any refrigeration
product, there is a slight temperature variance at different
locations within the cabinet.
Interior Light and Switch
The interior light makes it easy to view your wine labels
and enhances the display of your collection. Pressing the
“LIGHT” key toggles between 2 modes of operation for
the internal lights: functional (default) mode and showcase
mode. If you are in functional (default) mode, the lights
will turn on only if the door is open. If you are in showcase
mode, the lights will be on whether or not the door is open.
When in showcase mode, a light indicator is illuminated on
the display.
Warning Alarms
Your dual zone wine storage unit has been fitted with a
Sentry System™ refrigeration monitor. This monitor will let
you know that your storage unit is functioning properly for
optimum wine storage and will alert you in the unlikely event
there is an unstable condition.
Door Ajar Alarm
If the door has been left open for over five (5) minutes, the
alarm will sound and the message center will display an
amber “DOOR AJAR” message.
High and Low Temperature
If your unit reaches temperatures outside normal operating
temperatures for your set point for one (1) hour or greater,
an alarm will sound and the message center will display
either a red “HI/LOW TEMP UPPER” or a red “HI/LOW TEMP
LOWER” message. This will warn you that your wines have
seen temperatures that are out of range.
Power Failure
If your unit experiences a power failure, the message center
will display an amber “POWER FAILURE” message.
Reset Alarms
Press the “ON/OFF” button for approximately one second.
This will reset all audible and display alarms.
Sabbath Mode
By enabling this mode, you will be disabling the display,
Sentry System™ message center, audible alarms, and in-
terior lights. To enable Sabbath Mode, press and hold the
“SET” key while pressing the “°F/C” key 4 times within 7 sec-
onds. To disable Sabbath Mode, repeat the enable process.
The Sabbath Mode will automatically disable after 72 hours.
A power outage will not disable Sabbath Mode.
Advanced Sentry System™ features:
Sentry System™ continually monitors critical refrigeration
system components for proper operation. If component pa-
rameters exceed normal operation specifications, the display
will automatically flash the respective error code as follows:
E1-Compressor fault
E2-Condenser fan motor fault
E3-Upper compartment sensor fault
E4-Lower compartment sensor fault
Please call a qualified service technician if any of these
codes are displayed.
Figure 4
Upper
Lower
Warmer
Colder
˚F/C
Light
ON
OFF
Press and Hold
<SET>
Press ON/OFF to Reset
Sentry System
™
SET
SET
ON
OFF Door Ajar
Power Failure
Hi / Low Temp Upper
Hi / Low Temp Lower
