USING YOUR Sentry System
™
CONTROL, MODELS RWS38 & RWS60DX
Start Your Appliance
Please observe the following options when starting your ap-
pliance during initial plug-in.
1) If Sentry System™ LED is flashing amber (see Figure 3)
the appliance is on. Simply press and release “ON/
OFF” button to stop the flashing LED.
2) If the interior light is working but Sentry System™ display
is blank push and hold “ON/OFF” button for five (5)
seconds to start the appliance.
Once loaded with wine bottles, allow at least 24 hours for
the unit to stabilize before making any adjustments to the
initial temperature setting and minimize the door openings
during this time period.
Set Your Temperature Mode
This product can display either Fahrenheit or Celsius. To do
so, press the “
°
F/C” button on the display panel.
Viewing and Changing Current Temperature Settings
The temperature set point is initially set in the factory at 13
degrees C. The available temperature range of the unit is
from 4 to 18 °C. To view the set point push the “SET” button
once and the word “SET” and the current set-point will be
displayed. While “SET” icon is displayed push the “WARM-
ER” or “COLDER” button for your desired temperature. Push
the “SET” key to exit set-point mode and activate your new
temperature settings, or after 10 seconds the new settings
will automatically be activated.
As with any refrigeration product, there is a slight tempera-
ture variance at different locations within the cabinet.
Interior Light and Switch
The interior light makes it easy to view your wine labels
and enhances the display of your collection. Pressing the
“LIGHT” key toggles between 2 modes of operation for
the internal lights: functional (default) mode and showcase
mode. If you are in functional (default) mode, the lights
will turn on only if the door is open. If you are in showcase
mode, the lights will be on whether or not the door is open.
Warning Alarms
Your wine storage unit has been fitted with a Sentry System™
refrigeration monitor. This monitor will let you know if your
storage unit is not functioning properly for optimum wine
storage and will alert you in the unlikely event there is an
unstable condition.
Door Ajar Alarm
If the door has been left open for over five (5) minutes, the
alarm will sound and the LED will flash green. This will stop
as soon as the door is closed.
High and Low Temperature
If your unit reaches temperatures outside normal operating
temperatures for your set point for more than one (1) hour,
an alarm will sound and the LED will flash red. This will
warn you that your wines have seen temperatures that may
not be conducive for long-term storage.
Power Failure
If your unit experiences a power failure, the LED will flash
amber until the alarm is reset.
Reset Alarms
Press the “ON/OFF” button for approximately one (1) sec-
ond. This will reset all audible and display alarms.
Sabbath Mode
Your wine storage unit is equipped with a Sabbath Mode
feature. By activating this mode, you will be disabling all
displays, audible alarms, and lights.
To activate Sabbath Mode, press and hold the “SET” button
while pressing the “
°
F/C” button four (4) times within seven
(7) seconds. Sabbath Mode will automatically deactivate
after 72 hours. If a power outage occurs during Sabbath
mode, unit will automatically re-enter Sabbath mode from
the beginning of the 72 hour period. You may exit Sabbath
mode at any time by repeating the enable process.
Advanced Sentry System™ features:
Sentry System™ continually monitors critical refrigeration
system components for proper operation. If component pa-
rameters exceed normal operation specifications, the display
will automatically flash the respective error code as follows:
E1-Compressor fault
E2-Condenser fan motor fault
E3-Evaporator thermistor sensor fault
E4-Display thermistor sensor fault
Please call a qualified service technician if any of these
codes are displayed.
5
Sentry System™
Power Failure - Flashing Amber
High/Low Temp - Red
Press ON/OFF - Reset
Alarms OFF - Steady Amber
ON
OFF
13
C
Set
Warmer
Colder
°F/C
Light
Press and Hold
Figure 3
LED
