EN
7
7
Recirculation Version Air Outlet
To install the Recirculation Version of the hood, the Activated
charcoal filter must be fitted, see paragraph “ Activated charcoal
filter (Recirculation version)”.
• Screw the filter cover onto the air outlet, using four screws
12c
(2.9 x 12.5).
• Fix the directional grille
8
on the recirculation air outlet using
the 2 screws
12d
(2,9 x 9,5) provided.
16
12c
12d
8
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly in-
serted in the socket placed on the side of the fan.
Flue assembly
The chimney can only be installed with exhausting hood
• Fasten the angle iron
15
to the hood canopy using the screws
12d
(2,9 x 9,5) provided.
Upper exhaust flue
• Slightly widen the two sides of the upper flue and hook them
behind the brackets
7.2.1
, making sure that they are well
seated.
• Secure the sides to the brackets using the 4 screws
12c
(2,9 x
6,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook them be-
tween the upper flue and the wall, making sure that they are
well seated.
• Fix the lower part laterally to the hood body using the 2 screws
12c
(2,9 x 6,5) supplied.