Rangemaster Longstock 90 Induction, User'S Manual & Installation Instructions

Page: 34 / 44

INSTALLATION
Check the appliance is electrically safe when you have finished.
30
Final Checks
Hob Check
Check each cooking zone in turn. Be sure to use pans of the
correct size and material.
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier, and then turn on the ovens.
Check the oven fans start to turn and that the ovens heat up.
Final Fitting
Fitting the Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (
Fig. 8.13
).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole ( Fig. 8.14 ).
Customer Care
Installer : Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth fixing screw
Inner plinth
Fig. 8.13
Fig. 8.14