background image

 

 

 

 

EN 

1

11 

CARE AND CLEANING

 

Grease filters 

CLEANING METAL SELF- SUPPORTING GREASE FILTERS 

•  The filters must be cleaned every 2 months of operation, or 

more frequently for particularly heavy usage, and can be 
washed in a dishwasher. 

•  Remove the filters one at a time by pushing them towards the 

back of the group and pulling down at the same time.  

•  Wash the filters, taking care not to bend them. Allow them to 

dry before refitting. 

•  When refitting the filters, make sure that the handle is visible 

on the outside.

 

 

 

Activated charcoal filter (Recirculation version) 

REPLACING THE ACTIVATED CHARCOAL FILTER 

•  The filter is not washable and cannot be regenerated, and must 

be replaced approximately every 4 months of operation, or 
more frequently for particularly heavy usage. 

•  Remove the metal grease filters. 
•  Remove the saturated activated carbon filter by releasing the 

fixing hooks. 

•  Fit the new filter by hooking it into its seating. 
•  Refit the metal grease filters.

 

 

 

Lighting unit 

• For replacement contact technical support ("To purchase 

contact technical support").

 

 

 

Summary of Contents for HI-LITE HLTHDS90

















Reviews: