SERVICING WARNING
Disconnect from electricity supply before servicing. Check ap pli ance is safe when you have finished.
36
20. To Remove an Oven fan Element
Disconnect from electricity supply.
Remove the inner back as detailed in Section 18.
Remove the fi xings that secure the element within the
oven and lift the element away carefully. Disconnect
the leads and connect to the replacement element
and re-assemble parts in reverse order. Check that
the oven operates correctly.
21. To Remove Grill Element.
Disconnect from electricity supply.
Remove grill pan from grill chamber. From inside grill
compartment remove enamelled front shield from
grill roof, 2 screws and washers. Remove 2 screws
and washers securing the grill element front support.
Remove 1 screw from each of the grill elements
and withdraw grill elements from grill chamber.
Disconnect the leads and connect to the replacement
elements and re-assemble parts in reverse order.
Check operation of grill.
22 To Remove the LH Oven Bottom and Top
Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at
the rear of the unit. Remove the fi xings that secure
the cover and lift it clear.
Remove the 2 screws ‘A’ and allow the plate to drop
down.
Remove the 2 screws B, holding the element to the
bottom sheet.
Disconnect the leads, noting their positions.
Withdraw bottom element. Fit the new element and
re-assemble parts in reverse order.
Top Element
Open the LH oven door and undo the fi xings that
secure the heat shield. Remove the top element
bracket fi xings and withdraw element. Replace the
element and re-assemble parts in reverse order.
Check that the oven operates satisfactorily.
23. To change Main oven light bulb.
Disconnect from the electricity supply.
Remove the oven furniture. Unscrew the bulb. Fit
an Edison screw fi tting 15w 125-130v lamp, FOR
OVENS. It must be a special bulb, heat resistant to
300°C.
