15
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Dear Installer
Before you start your installation, please complete the details
below
Should your customer have a problem relating to your
installation they will be able to contact you easily.
Safety Requirements
The hob must be installed in a well-ventilated space, in
accordance with the section entitled ‘Electrical Connection’.
Read these instructions before installing or using the
appliance.
Installation and preparation
for use
n
WARNING: This appliance must be installed by an
authorised service person or qualified technician,
according to the instructions in this guide and in
compliance with the current local regulations.
•
Incorrect installation may cause harm and damage, for
which the manufacturer accepts no responsibility and
the warranty will not be valid.
•
Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency and/or
nature of the gas and gas pressure) and the adjustments
of the appliance are compatible. The adjustment
conditions for this appliance are stated on the label.
•
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.).
Provision of Ventilation
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of the Hob
The hob may be installed in a kitchen/kitchen diner but
NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
n
This appliance should not be installed in a boat or
caravan.
The hob must be installed in accordance with the relevant
Building regulations and IET regulations.
You will need the following equipment to complete the hob
installation satisfactorily:
•
Multimeter (for electrical tests)
You will also need the following tools
1.
Electric drill
2.
Jigsaw
3.
Steel tape measure
4.
Cross head screwdriver
5.
Pencil
6.
Sharp knife
ArtNo.050-0011 - Installer information table
Installer’s Name
Appliance Serial Number
Installer’s Telephone Number
Installer’s Company
5. Installation
