background image

8

Child Lock

After switching on the appliance, the child lock function can 
be activated. To activate the child lock, simultaneously press 
the left and right side of the Sliding Button and then press the 

right

 side of the Sliding Button again (

Fig. 2.5

). “L” indicating 

LOCKED will appear on all heater displays and the controls 
can not be used. (If a cooking zone is in the hot condition, 
“L”and “H” will display alternately). 

The hob will remain in a locked condition until it is unlocked, 
even if the appliance has been switched off and on.

To deactivate the child lock, first switch on the hob. 
Simultaneously press the left and right side of the Sliding 
Button and then press the 

left

 side of the Sliding Button 

again (

Fig. 2.6

). “L” will no longer be displayed and the hob 

will switch off.

Key Lock

The key lock function is used to set ‘safe mode’ on the 
appliance during operation. It will not be possible to make 
any adjustments by pressing the buttons (for example heat 
settings). It will only be possible to switch the appliance off.

The lock function is active if the key lock button (

6

) is pressed 

for at least 2 seconds. This operation is acknowledged by a 
buzzer. After successful operation, the key lock indicator will 
flash and the heater will be locked.

Timer Function

The timer function is available in two versions, as follows.

Minute minder timer (1 to 99 minutes):

The minute minder timer can be operated if the cooking 
zones are switched off. The timer display will show “

00

” with a 

blinking dot. 

Use the Timer (

5

) and Sliding Buttons (

9

) to increase/decrease 

the time. The range is between 0 and 99 minutes. If there is 
no adjustment to the displayed time within 10 seconds, the 
minute minder timer will be set and the blinking dot will 
disappear. Once the timer is set, it begins to count down. 

When the timer reaches zero, a signal will sound and 
the timer display will blink. The sound signal will stop 
automatically after 30 seconds and/or by pressing any timer 
selection button.

The minute minder timer can be changed or switched off at 
any time by using the timer setting button (

5

) and/or use the 

sliding buttons (

9

). Switching off the hob by pressing the ON/

OFF button (

11

) at any time will also switch off the minute 

minder timer.

Fig. 2.5

 

Fig. 2.6

 

Press the 

right

 side of the 

Sliding Button twice

Press the 

left

 side of the 

Sliding Button twice

Summary of Contents for Eclipse 60





























Reviews: