
29
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Dear Installer
Before you start your installation, please complete the details
below.
If your customer has a problem relating to your installation
they will be able to contact you easily.
You must be aware of the following safety requirements &
regulations:
This appliance shall be installed in accordance with the
regulations in force and in a well-ventilated space. Read the
instructions before installing or using this appliance.
The cooker must be installed in accordance with:
•
All relevant British Standards / Codes of Practice
•
The relevant Building / IET regulations
Before The Installation
Open the oven door and take out all the accessories and
remove the packing material.
Make sure that the oven is not damaged by any way. Check
that the oven door closes correctly and the inside of the door
and front oven panel are not damaged.
Do not use the oven if the power cable or the plug is
damaged, if the oven does not function correctly or if it has
been damaged or dropped. Put the oven on a flat and stable
surface. The oven should not be installed close to any heat
source, radios or televisions.
During installation, make sure that the power cable does
not come into contact with any moisture or objects with
sharp edges and the back of the oven. High temperature can
damage the cable. Warning: after the oven is installed you
should make sure you can access the plug.
Location of the Oven
The oven may be installed in a kitchen/kitchen diner but NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
n
n
This appliance should not be installed in a boat or
caravan.
The hob must be installed in accordance with the relevant
Building regulations and IET regulations.
You will need the following tools and equipment to
complete the oven installation satisfactorily:
1.
Electric drill
2.
Steel tape measure
3.
Cross head screwdriver
4.
Pencil
5.
Multimeter (for electrical checks)
ArtNo.050-0011 - Installer information table
Installer’s Name
Appliance Serial Number
Installer’s Telephone Number
Installer’s Company
3. Installation
Summary of Contents for ECL45MCBL/BL
Page 1: ...ECL45MCBL BL User Guide Installation Service Instructions U111102 03...
Page 2: ......
Page 39: ...36 NOTE...