31
Display Message
Possible Cause
Remedy
Fill Water
The water tank is empty or positioned
incorrectly.
Fill the tank with water and / or insert it
correctly, pushing it as far as it will go.
Fault 3
The grinding is too fine and the coffee is
delivered too slowly.
Turn the grinding adjustment knob one
click clockwise towards big symbol.
Fault 3
The machine cannot make coffee there
is air in the hydraulic circuit.
Run “self check” Program and can
repair the machine
Empty Grounds
The total number coffee made has
reached 15.
Extract the drip tray and empty the
grounds container and clean. then put
to original position.
n
n
Important: when removing the
drip tray the grounds container
MUST be emptied, even if it is
not completely full.
Tray Missing
The tray not insert the machine or not in
right position
Put the tray to original position.
Fill Powder
The “pre-ground Coffee” function has
been selected without placing any pre-
ground coffee in the funnel.
Extract the appliance and place pre-
ground coffee in the funnel by use
spoon.
The funnel (A14) is blocked
Empty the funnel with the help of a knife
as described in the section “Cleaning the
pre-ground coffee funnel’.
Decalcify Ready
The machine must be descale
The descaling procedure described
in the“Descaling” section needs to be
performed as soon as possible
Fill Beans
The coffee beans have run out
Fill beans to container
Add more powder
Not enough powder to make coffee
Use spoon to add powder
Clean Brew
The inside of the appliance is very dirty
Clean the inside of the appliance
thoroughly, as described in the section
“Cleaning and maintenance”. If the
message is still displayed after cleaning,
contact a service centre
Table 5.1
DocNo.054-0001 - Troubleshooting BI oven
5. Troubleshooting
Summary of Contents for ECL45CFBL/BL
