Rangemaster Arleston 60 Gas, User Manual

Page: 21 / 24

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
19 19
Changing the Oven Burners
Remove the burner shield via two screws situated on the
front (Fig.8-3) .
Loosen the three screws which secure the burner cradle to
the oven cavity.
n n
Care must be taken when moving the burner cradle.
Gently ease the burner cradle to the right to gain access to
the spring clip located on the left hand side. Depress the clip
and gently lift off the burner.
Remove and replace the injector using a 7mm box spanner.
Be careful not to drop the injector.
Reassemble in the reverse order.
Pressure Testing
Connect the appliance to the gas supply. Check the appliance
is gas sound.
The gas pressure can be measured at one of the hotplate
injectors. Lift off a burner head. Fit the pressure gauge to the
jet. Turn on and light one of the other burners with a match.
Turn on and press in the control knob for the burner with the
pressure gauge fitted.
The pressure should be 29 mbar for Butane and 37 mbar for
Propane.
After checking the pressure, turn off the taps and replace the
burner head.
Reassemble burner top, making sure it is reassembled in the
correct way on the burner body.
n n
Check the appliance is gas sound.
n n
Check operation of all the burners.
Fig.8-3