Range Road RR5022 Series, Owner'S Manual

Page: 8 / 35

Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
3) Place 2 guide rails on the floor and install 2 or 3 levelling feet in the large round holes on the bottom of each
rail
4) Place the 2 rails on their levelling feet parallel to each other,
the measurement from outside rail to outside rail:
-
RR5022 & RR5026
845mm (33 ¼”)
- RR5029 902mm
(35 ½”)
- RR5032
1008mm (39 11/16”)
For any Sawmill to cut square and straight all pieces have to be squared to each other
and level. Use the adjusting feet to level one rail and then make sure the second rail is
level with the first one.