Range Road RR5022 Series, Owner'S Manual

Page: 12 / 35

Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
14) Cross measure new rails and adjust
15) When rails are square and level tighten 8 bolts in log support cross tube, mount the centre log support cross
tube and tighten it.
Re check levelness and cross measurements.
16) Take the 2 galvanized square posts (View 2 #25) with the pulleys on them and place them into the head unit
square tubes, remove the bolts and pulleys, pay attention to where the pulley spacers go, place these to the
side.