Range Road Enterprises Ltd
Box 5 Site 9 RR1
Lacombe, AB T4L 2N1
www.range-road.ca
•
Distribute the load evenly.
Uneven loads may cause the saw mill to tip, resulting in personal
injury to the operator or others. Log should be secured before sawing.
•
Use the saw mill on flat and level surfaces
capable of supporting the saw mill and its maximum
load.
•
Pulling or pushing
a load on a slanted or uneven surface can result in loss of control. The Saw
mill needs to be on a flat and level surface before sawing.
•
Store idle saw mill.
When saw mill is not in use, store it in a secure place out of the reach of
children. It is also a good idea to back off the blade tension when not in use, helps to preserve
belt and blade life. Inspect it for good working condition prior to storage and before re-use.
IMPORTANT SAFETY INFORMATION
WARNING! Read all instructions. Failure to follow all instructions listed below
may result in fire, serious injury and/or DEATH.
The warnings and precautions
discussed in this manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
Set Up Precautions.
1.
Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel
storage and handling procedures. Do not store fuel or other flammable materials near the
machine.
2.
Have fire extinguishers nearby.
3.
Operation of this equipment may create sparks that can start fires around brush and dry
vegetation. A spark arrestor may be required. The operator should contact local fire
agencies for laws or regulations relating to fire prevention requirements.
4.
Set up and use only on a flat and level surface. Area must be well ventilated.
5.
Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator
during set up.