VirtualDJ 8
– Rane Sixty-Two
12
In All modes, hold
SHIFT
down and then use this button to
set
the left or right deck as
Master Deck
(all other decks will sync to the Master Deck). Hold
SHIFT
down and then
hold
this button for more than 1 second to set the Master Deck selection back to the
auto mode
.
33. IN/LOOP
/SYNC
In Auto Loop mode, use this button to
trigger a loop
of a pre-selected size in beats (led
will flash orange when enabled).
In Manual Loop mode, use this button to
set a Loop Entry (In) point
. If a loop is
enabled, use the same button to enable/disable the
Loop In Wheel mode
and then use
the jogwheel on the VirtualDJ GUI or a MIDI controller to fine adjust the Loop Entry point
(led will flash green). Press again to turn off this mode or the Loop button to exit.
In All modes, hold
SHIFT
down and then use this button to
sync
hronize the tempo and
phase of this deck with the opposite (or the Master Deck if more than 2)
34. SELECT/BEATS ENC.
Use this encoder to
select the length
of the applied loop in
beats. Turn clockwise to
double
the size and anti-clockwise to
half
the size.
Push
the encoder
to
trigger
the selected loop
.
When a Loop is triggered, hold
SHIFT
down and then use the encoder to move the loop
forward or backwards by half the size of the applied loop in beats.
35. MANUAL/AUTO.
Use this button to toggle between the
Manual
and
Auto Loop mode
.
36. SCROLL.
Use this encoder to
scroll through files or folders
in the selected Browser
Window.
Hold
SHIFT
down and then use the encoder to
cycle
through the available views of the
Sideview
(Automix, Sidelist, Karaoke, Sampler and Shortcuts)
Push
the encoder to
enter the Songs list
(if the focus is on the Folders list) or
load
the
selected track to the left or right deck (if focus is on any other Browser window)
Hold
SHIFT
down and then
push
the encoder to
add
the selected track to the
Automix
list.
37. BACK.
Use this encoder to
scroll through files or folders
in the selected Browser
Window.
38. SP-ASSIGN.
When 2 computers are sharing the same mixer, define which of them will
control/use the Sampler buttons.
H.
Auxiliary/Sampler
This section controls the Output Channels 5 and 6 of the USB audio interface of the Rane
Sixty-Two. By default VirtualDJ
Sampler is routed to this Input
