manualshive.com logo in svg

Rane MONGOOSE, Installation Manual, Page: 46 / 52

Share
Download
Rane MONGOOSE Installation Manual Download Page 46

MONGOOSE

Installation Manual

46

Color / Text

Meaning

Recommended Action

Audio Rx Error

The RAD is reporting that it does 

not sense an Audio lock from 

the Mongoose.

This error can occur when there is a communication error. If there is a com-

munication error, fix that before investigating an Audio Rx error.

The twisted pair in the CAT 5 cable that receives Audio at the RAD from the 

Mongoose could be miswired or broken. Verify the CAT 5 cable is correctly 

terminated or if using a punch block, verify that the green pair is properly 

punched (assuming T568B termination).

Audio Tx Error

The Mongoose does not sense 

an Audio lock from the RAD.

The twisted pair in the CAT 5 cable that transmits Audio from the RAD to the 

Mongoose could be miswired or broken. Verify the CAT 5 cable is correctly 

terminated or if using a punch block, verify that the blue pair is properly 

punched (assuming T568B termination).

troubleshooting the mongoose status in the mongoose Settings dialog

Color / Text

Meaning

Recommended Action

OK

The Mongoose is operating 

normally without errors.

No action needed.

RAD Firmware 

Updating

One or more RADs are reporting 

that they are in the process of 

updating their firmware.

No action needed. 

Once the RAD firmware update is complete the mongoose will establish 

communication with the RAD and update the individual RAD status.

RAD Model 

Mismatch

The physical RAD model 

connected to this port does not 

match the RAD model specified 

in the Mongoose configuration.

Check the status on the individual RADs to determine which have a model 

mismatch.

See the previous table on RAD Status for suggestions on troubleshooting 

individual RAD mismatches.

Configuration 

Corrupted

The Mongoose could not find 

or load the configuration file.

The configuration stored on the Mongoose device is corrupted or missing 

and needs to be reloaded.

Create a configuration and apply it to the device before attempting to open 

the device.

RAD 

Communication 

Error

The Mongoose cannot commu-

nicate with one or more RADs 

even though they are physically 

attached to the Mongoose.

Check the status on the individual RADs to determine which have a 

communication error.

See the previous table on RAD Status for suggestions on troubleshooting 

individual RAD communication errors.

Summary of Contents for MONGOOSE





















































Reviews:

No comments