background image

MLM82S

MIC & LINE MIXER

Data Sheet-4

All features & specifications subject to change without notice. 9-2015

©Rane Corporation  10802 47th Ave. W.,  Mukilteo WA 98275-5000 USA  TEL 425-355-6000  FAX 425-347-7757  WEB rane.com

Rear Panel

Architectural Specifications

The mixer shall have four studio-grade mono mic/line inputs 

each with XLR input jack, 15 V phantom power, line pad, A 

/ A+B / B mix assign switch, level control and signal/overload 

indicator. A single switch shall make phantom power available 

to all four microphone inputs. Phantom power shall be removed 

automatically from any mic/line input set for line input. For ease 

of use, mic/line preamplifiers shall use a single control for input 

gain trim and mix level.

The mixer shall feature four stereo line inputs each with ¼" 

TRS input jack, level control and pre-level control mono switch. 

The inputs shall provide for dual mono operation with four 

mono signals available for the A mix and four mono inputs avail-

able for the B mix.

A and B mix outputs shall feature overload indicators, 

independent A/B level controls, internally selected 40 dB pad for 

microphone level output and XLR output jacks.

Security features shall include placement of the phantom 

power and line switches on the rear panel, recessed assign switch-

es, internally located pad switch for selecting line or microphone 

output level and recessed stereo line input mono switches with 

position indicators. In addition, each of the front panel level 

control knobs may be removed and replaced with a security plug. 

Four security plugs shall be provided for this purpose.

The unit shall be capable of operation by means of its own 

built-in universal power supply operating at 100-240 VAC and 

meet CE requirements. The unit shall be UL and cUL listed. 

The unit shall be constructed entirely from cold-rolled steel, and 

mount into a standard EIA relay rack occupying 1 rack-space.

The unit shall be a Rane MLM82S Mic & Line Mixer.

IN 1

A / A+B / B

STEREO /

MONO

IN 2
IN 3
IN 4

OUT “A”

MIC / LINE

OUT “B”

MLM82S

“B”

CONFERENCE

SEND

“A”

LOCAL

AMPLIFIER

MIC

1

MIC

2

MIC

3

MIC

4

L
R

LAPTOP

L
R

MP3

L
R

DVR

L
R

DVD

Application Diagram

Summary of Contents for MLM82S

























Reviews: