Manual-3
DA216S Rear Panel
1
INPUT Euroblocks:
Attach either Microphone or Line-level sources here. Euroblocks accept any #14 to #26 guage wire.
Connect balanced sources to the respective “+” and “–”terminals, and tie the shield to chassis ground.
For unbalanced sources use two-conductor shielded cable as described in
DA216S Connection
on page Manual-4.
2
Output Euroblocks 1-16:
Balanced Outputs are provided for each of 16 channels.
Connect two conductor shielded cable to “+” and “–” terminals, and connect the shield to the ground terminal.
For unbalanced use, do not connect “–” to chassis ground. See the
Outputs
section on page Manual-4.
3
INPUT PAD switches:
In the MIC position (
out
), the gain is appropriate for a microphone Input (40 dB or 60 dB). In the LINE
position (
in
), the gain is line-level (0 dB or 20 dB). When this switch is in the LINE position, PHANTOM POWER (
5
) for the
channel is disabled.
4
INPUT GAIN switches:
Changes the gain by 20 dB. That is, with mic Input, the INPUT GAIN switch sets the gain to 60 dB
(
out
) or 40 dB (
in
). With a line-level Input, it sets the gain to 20 dB (
out
) or 0 dB (
in
).
5
PHANTOM POWER switch:
When activated (
in
), 15 VDC Phantom Power appears at each mic-level Input and the LED
illuminates. If an Input is selected for line-level, the Phantom Voltage is disabled for that channel, even when the PHANTOM
LED is lit.
6
Power connector:
The internal universal switching power supply operates on any AC mains 100 to 240 VAC, 50 or 60 Hz (most
places in the world). All that is required when traveling is the appropriate IEC line cord.
INPUT
B
MIC
MIC
PAD
PAD
GAIN
GAIN
INPUT
A
40
60
dB
0
MIC
PHANTOM
POWER
15V
20
40
60
dB
0
20
LINE
LINE
INPUT
A
INPUT
B
4
3
2
1
-
+
-
+
-
+
-
+
-
+
-
+
8
7
6
5
-
+
-
+
-
+
-
+
12
11
10
9
-
+
-
+
-
+
-
+
16
15
14
13
-
+
-
+
-
+
-
+
-
+
-
+
100-240 V
50/60 Hz 7 WATTS
ALL AUDIO JACKS ARE CLASS 2 WIRING
DA216S
RANE CORPORATION
COMMERCIAL AUDIO
EQUIPMENT 24TJ
R
6
5
4
3
1
2
