Rane DA216S, Operator'S Manual

Page: 10 / 28

DA216S
DISTRIBUTION AMPLIFIER
Data Sheet-2
Features and Specifications
Parameter Specification Limit Units Conditions/Comments
Mic Input Impedance 1.82k 1% Ω Balanced 909 + 909
Line Input Impedance 17.9k 1% Ω Balanced 8.97k + 8.97k
Mic Gain Control +40 & +60 ±2 dB 2-position switch
Mic Pad 20 ±2 dB 2-position switch
Line Gain Range 0 & +20 ±2 dB 2-position switch
Overall Mic Gain +56 & +76 ±4 dB All controls maximum
Overall Line Gain +16 & +36 ±4 dB All controls maximum
Max Mic Input Level -20 typ dBu Gain at 40 dB
Max Line Input Level +21 typ dBu Gain at 0 dB
Overload LED 3 dB below clip typ Clip defined as 1% THD+N
Phantom Power +15 ±0.5 VDC Phantom Power switch active
Output Impedance 200 1% Ω Balanced 100+100
Output Drive Level +24 typ dBu 600 Ω load
Output Cable Length 1500 max feet Belden 8451 or equivalent
Mic Equivalent Input Noise -128 typ dBu Rs=150, gain=60 dB
Line Signal-To-Noise Ratio 100 min dBV gain=0 dB, re +4 dBu, 22 kHz BW
THD+Noise (Line Input) 0.005 typ % gain=0 dB, +4 dBu@1 kHz, 80 kHz BW
Frequency Response, Line 15-50 kHz +0, –3 dB 0 dB Gain, 0 dBu Output
Frequency Response, Mic 15-50 kHz +0, –3 dB 40 dB Gain, 0 dBu Output
Frequency Response, Mic 30-50 kHz +0, –3 dB 60 dB Gain, 0 dBu Output
Crosstalk 80 typ dB +4 dBu Output, 1 kHz
Power Supply Requirement 100 to 240 10% VAC 50/60 Hz, 7W
Unit: Conformity CE, FCC, CULUS
Unit: Construction All Steel
..........Size 1.75"H x 19"W x 5.3"D (1U) (4.4 cm x 48.3 cm x 13.3 cm)
..........Weight 4 lb (1.9 kg)
Shipping: Size 4.25" x 20.3" x 13.75" (11 cm x 52 cm x 35 cm)
..........Weight 7 lb (3.2 kg)
Note: 0 dBu=0.775 Vrms