Manual-2
FRONT PANEL DESCRIPTION
1
ALIGNMENT MODE buttons: Press DISTANCE for delay in feet, meters, or milliseconds. Press VIDEO for alignment by frames
or milliseconds.
2
CHANNEL button: Press this to switch the cursor location between channels. This button has no effect if the channels are linked.
3
LINK button: Links channels together so changes made affect both channels at once. To treat the channels as a stereo pair, make
sure settings for each channel are identical before pressing the LINK button. Press the LINK button again to unlink.
4
CURSOR buttons: Press
left or right
cursor to select the value for editing.
5
COARSE and FINE controls: These buttons affect the setting that is currently highlighted to change settings or delay values.
COARSE increments or decrements delay by 1 ms/feet/meters or 1.0 frames, FINE by 0.1 ms/feet/meters or 0.5 frames.
6
LCD Display: Shows the current readout of settings for each channel. Fields may be selected using the CURSOR buttons and
changed using the COARSE / FINE controls. See the DISPLAY sections below.
7
STORE button: Stores the Delay configuration into current memory for the selected channel. If the asterisk
*
character is shown
to the right of the display, the current value does not match the memory location.
8
RECALL button: Copies the stored delay setting into the active channel. If channels are linked, then both are recalled.
9
BYPASS buttons: Toggle relays for each channel. If LED is on, bypass is enabled and the device functions like a wire. If bypass LED
is off, the channel is active.
0
SIGNAL / OVERLOAD LEDs: SIG LEDs indicate signal presence on the input. OL LEDs light red when an input signal is near
the maximum level and may clip.
RANE AD 22S AUDIO DELAY
1
2 3
4
6
8
9
5
7
0
AD22S
AUDIO DELAY
DISTANCE
ALIGNMENT
CURSOR
OL
SIG
VIDEO
BYPASS
STORE
MEMORY
RECALL
FINE
COARSE
1
2
1
2
1
2
CHANNEL
CHANNEL 1
CHANNEL 2
LINK
1: 25.50 Feet 80 °F Mem A *
>2:[ 2.74]Meters 27 °C Mem B
3 4
1
5
6 7
8
2
9
Distance Mode
>1:[ 2.5]Frames 29.97 fps Mem A *
>2:[ 3.0]Frames 29.97 fps Mem A
3 4
1
5
6 7
8
2
9
Video Mode
DISPLAY: DISTANCE MODE
1
Cursor
2
Active Channel(s)
3
Channel #
4
Delay Setting
5
Units (Feet, Meters, ms)
6
Temperature
7
Temp. Units
8
Mem. Bank
9
Memory Indicator - * Shown if different than stored value
DISPLAY: VIDEO MODE
1
Cursor
2
Active Channel(s)
3
Channel #
4
Value
5
Units (Frames, ms)
6
Frame rate
7
Units (Frames per second)
8
Mem. Bank
9
Memory Indicator - * Shown if different than stored value
