4
Processing Workspace
Use the Processing Workspace to navigate through the configuration. Follow these steps to
customize your configuration:
Note:
Before beginning, keep your power amplifiers turned
OFF
.
1.
Turn on Terminal 1010x by connecting the IEC power cable from the power input to a power
outlet. Use standard Ethernet cables to connect the Ethernet Port on the rear panel of Terminal
1010x. Connect a router to the
Computer Ethernet Port
on the rear of Terminal 1010x and
connect a computer with Halogen to the router.
2.
Open Halogen.
3.
Once the
Ethernet Comm
LED
is lit on the front panel, press
Apply
on the upper left corner of
Halogen and select
“Rename this 1010x”
to transfer the configuration to the Rane DSP. Once
connected, you can rename Terminal 1010x with the name of the venue.
Note:
By default, every time a configuration is applied to the Rane DSP, all the outputs are
initially muted for speaker protection. Halogen allows you to check the signals before unmuting
the outputs.
