VNA GUI reference
R&S
®
ZNL/ZNLE
550
User Manual 1178.5966.02 ─ 19
If the "Fixture Simulator" is disabled for the related channel (see
on page 527), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See
Type
Switches between "Deembedding" and "Embedding" network definition.
Port
Physical port. The transformation networks are defined such that the analyzer is con-
nected to the left of the circuit while the DUT is connected to the right side. You can
define independent transformation networks for all ports.
Remote command:
The
<PhyPt>
numeric suffix in the embedding/deembedding commands identifies the
CALCulate<Ch>:TRANsform:VNETworks:SENDed:
or
CALCulate<Ch>:TRANsform:VNETworks:
SENDed:EMBedding<PhyPt>[:STATe]
.
All Deembedding Activated
Deactivates or activates all deembeddings (single-ended, balanced, port set, ground
loop) for the active channel, if any.
This control is only visible if
Remote command:
n.a.
Offset Embed softtool