Basic Operation
R&S
®
ZNH
65
User Manual 1334.5985.02 ─ 02
4.6
Using a Power Sensor
R&S
ZNH option
R&S ZNH-K9 (order number: 1334.6800.02) option is required to operate the
R&S
ZNH in the power sensor mode.
For highly accurate power measurements, you can connect one of the power sensors
that are supported by the R&S
ZNH.
For a list of R&S
ZNH supported power sensors, see the datasheet of the R&S
ZNH.
You can connect the list of supported power sensors to the USB port of the R&S
ZNH.
This connector allows you to control the power sensor and supplies it with power. For
more information, see
4.6.1
Measuring the Power with a Power Sensor
For more information about the characteristics of the supported power sensors, refers
to their datasheet.
Using a Power Sensor