R&S ZNH, User Manual

Page: 229 / 369

Remote Commands
R&S
®
ZNH
222 User Manual 1334.5985.02 ─ 02
●
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
on page 249
●
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
on page 250
●
[SENSe:]DETector<1...2>[:FUNCtion]
on page 222
●
[SENSe:]DETector<1...2>[:FUNCtion]:AUTO
on page 223
●
FORMat[:DATA]
on page 250
●
FORMat:BORDer
on page 251
●
MEASurement<1...2>:ISUP
on page 251
●
MEASurement<1...2>:ISUP:APER
on page 251
●
MEASurement<1...2>:ISUP:APER:AUTO
on page 252
●
TRACe<1...2>[:DATA]?
on page 252
For a detailed description of the commands not described below, see Chapter 12.6.3.5,
"Working with Traces" , on page 248 in the CAT mode.
DISPlay:LAYout <LayoutMode>
This command arranges the diagrams in the screen, leaving the diagram contents
unchanged.
Parameters:
<LayoutMode> SINGle | DHORizontal | DVERtical | TRIPle | QUADruple
SINGle
One measurement trace window is displayed.
DHORizontal
Two measurement trace windows are arranged in top and bot-
tom rows.
DVERtical
Two measurement trace windows are arranged side by side.
Triple
Three measurement trace windows are displayed with one at the
top and two at the bottom arranged side by side.
QUADruple
Four measurement trace windows are displayed with two at the
top and two at the bottom rows.
Example: DISP:LAY SING
Single measurement trace window is displayed.
[SENSe:]DETector<1...2>[:FUNCtion] <Detector>
This command selects a detector function.
The numeric suffix at DETector specifies the primary or secondary detector.
Suffix:
<1...2>
.
1...2
Remote Control - Commands