Maintenance
R&S
®
ZN-Z103
7
User Manual 1321.2276.02 ─ 02
3. Remove the test cable from the unit, connect your DUT instead and perform
calibrated measurements.
Accuracy Considerations
To ensure an accurate calibration, please observe the following items:
●
No adaptors must be inserted between the calibration unit and the test
port.
●
After connecting the unit to the USB port, allow for a sufficient warm-up
time (see data sheet) before starting the calibration.
6
Maintenance
In case of a potential damage or misfunction of the unit as well as for verification
or recalibration of the device please contact your nearest Rohde & Schwarz ser-
vice center.