Remote control commands
R&S
®
SMW-K555
41
User Manual 1179.5776.02 ─ 01
The following chapters describe the commands specific to the Bandwidth Extension
option.
.................................................................................................41
..............................................................................................42
5.1
General commands
The
SCONfiguration:BEXTension
subsystem contains the commands for configu-
ration of a bandwidth extension setup.
Example: Loading a bandwidth extension setup file
SCONfiguration:BEXTension:SETup:FILE?
// Response: ""
// No file loaded. Load a file with extension *.bwsa, e.g. the file "test_4GHz.bswa".
SCONfiguration:BEXTension:SETup:FILE test_4GHz
// Query if the file is loaded.
SCONfiguration:BEXTension:SETup:FILE?
// Response: "test_4GHz"
SCONfiguration:BEXTension:STATe 1
Commands
:SCONfiguration:BEXTension:SETup:FILE
..........................................................................41
:SCONfiguration:BEXTension:STATe
.................................................................................. 41
:SCONfiguration:BEXTension:SETup:FILE
<SetupFile>
Loads the selected file from the default or the specified directory. Loaded are files with
extension
*.bwsa
.
Parameters:
<SetupFile>
"<filename>"
Filename or complete file path; file extension can be omitted.
Example:
See
Example "Loading a bandwidth extension setup file"
Manual operation:
See
:SCONfiguration:BEXTension:STATe
<State>
Activates bandwidth extension.
Parameters:
<State>
1 | ON | 0 | OFF
*RST:
0
Example:
See
Example "Loading a bandwidth extension setup file"
General commands