R&S SMW-K44, User Manual

Page: 384 / 455

Remote-Control Commands Satellite Navigation
384 User Manual 1178.6379.02 ─ 01
Return values:
<RMode> STOP | RUN
*RST:
STOP
Example: See Example "Configure and enable triggering" on page 382.
Usage: Query only
Manual operation: See "Running/Stopped" on page 197
[:SOURce<hw>]:BB:GNSS:TRIGger:SLENgth <SLength>
Defines the length of the signal sequence to be output in the
SINGle
trigger mode.
Parameters:
<SLength> integer
Range:
1 to 4294967295
*RST: 1023
Example: See Example "Configure and enable triggering" on page 382.
Manual operation: See "Trigger Signal Duration" on page 197
[:SOURce<hw>]:BB:GNSS:TRIGger:EXECute
Executes an internal trigger event.
Example: See Example "Configure and enable triggering" on page 382.
Usage: Event
Manual operation: See "Execute Trigger" on page 197
[:SOURce<hw>]:BB:GNSS:TRIGger:ARM:EXECute
Stops (arms) waveform output.
Example: See Example "Configure and enable triggering" on page 382.
Usage: Event
Manual operation: See "Arm" on page 197
[:SOURce<hw>]:BB:GNSS:TRIGger:EXTernal:SYNChronize:OUTPut <Output>
Enables signal output synchronous to the trigger event.
Parameters:
<Output> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Configure and enable triggering" on page 382.
Manual operation: See "Sync. Output to External Trigger/Sync. Output to Trigger"
on page 198
Trigger Settings