Remote-Control Commands
Satellite Navigation
374
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:SATellite:RANGe:RATE
............................ 377
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:SATellite:SLEVel
......................................377
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:SATellite:TDELay
..................................... 377
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:SATellite:VELocity:ECEF
.......................... 377
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ACCeleration:ECEF
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:ACCeleration
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:JERK
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:RATE
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:GDOP
............................. 378
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:GSPeed
.......................... 378
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:HDOP
............................. 378
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:JERK:ECEF
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:PDOP
............................. 378
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:ECEF
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:ENU
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:LLA
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:TDOP
............................. 378
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VELocity:ECEF
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VELocity:LNED
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VDOP
............................. 378
[:SOURce<hw>]:BB:GNSS:LOGGing:MODE
<Mode>
Sets the logging mode.
Parameters:
<Mode>
RT | OFFLine
RT
= real-time
OFFLine
= offline
*RST:
RT
Example:
See
Example "Enabling data logging"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:ABORt
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:GENerate
Logging files are created and saved. Files with the same name are overwritten.
[:SOURce<hw>]:BB:GNSS:LOGGing:OFFLine:
.
Example:
See
Example "Enabling data logging"
Usage:
Event
Manual operation:
See
Data Logging